Adhesive LED Display presentation
A flexible transparent LED display which could be stuck, to do what traditional display cannot do then ho help customer generate revenue.
The major advantage of our Adhesive LED Display is its light weight, thinness, high permeation ratio and its easy way to install.
Our adhesive LED Display product series adopts our self-developed bare die chip driver IC and light emitting chip that uses micron-grade light source. We install components on PCB board with high transparent rate. Through specially designed solid glue, the whole display unit is integrated into an optical lens base board, with a minimum thickness of less than 1mm-3mm.
A . Adhesive LED Display can stick on the building glass walls of the building. The ADs could be displayed on the Adhesive LED Display that stick on the city landmark building.
B . The stores glass windows along the street.
C . Banks, real estate, Car 4S shops windows etc.
D . Subway entrance.
E . Brightization of city: along the fence and great buildings.
F . Interior decoration: shopping malls stores decoration, exhibition hall presentations. It can play the advertisement when it is turn on and can decorate the windows when it is turn off.
The adhesive LED Display adopts the flexible FPC or PCB material which can be adjusted according to glass or wall surface of any arc surface.
With micron-grade light source, protected by transparent, high temperature resistant and antistatic waterproof membrane. LED lights and driver IC is invisible from the appearance. Besides, no body structure and mask were installed.
Saving cost Thin
Do not need steel structure, do not need to change the appearance of the building, effectively reducing the transportation and installation costs.
Our adhesive LED Display
Our product series adopts our self-developed bare die chip driver IC and light emitting chip that uses micron-grade light source. We install components on PCB board with high transparent rate. Through specially designed solid glue, the whole display unit is integrated into an optical lens base board, with a minimum thickness of less than 1mm-3mm.
Strong heat dissipation
With improved the photoelectric conversion efficiency, it reduces the failure rate of display, guarantees longer service life and decreases maintenance costs.
Thin, light and Transparent
1MM thickness;1-3 kg/㎡; Transparency rate up to 86%.
1.Tear open the release liner
2. Adjust the LED screen onto the glass
3. Connect the signal cables
4. Connect the power supply
Ideal for array type of windows fixation
This product can easily overtake the challenges of all windows with array type of fixation windows.
The screen can be cut out just in the exact section of the attaching system.
Adhesive LED Display picture
Transparent adhesive LED – Large pixel series – Specification.
Application on building facade – Curtain Wall – etc ; P25,P30 is also available
Transparent adhesive LED – small pixel series – Specification.
Application on building facade – Curtain Wall – etc ; P2, P6, P8 are also available